Cahier groupe n°5 : Différence entre versions

Version actuelle datée du 4 janvier 2016 à 16:26

Sommaire

1 Useful information
- 1.1 Progress
2 Specification of the specific task
- 2.1 Presentation of the particular task
- 2.2 Hardware used for the particular task
3 Progress monitoring

Useful information

Gabriel Pagola Nielsen & Jérémie Denéchaud

Xen Vitural Machine: Name - troubadour; Address - 193.48.57.165
WiFi hotspot - Particular task: Name - Troubadour; Address (first part) - 172.26.79.11; Address (second part) - 10.10.10.2; Username/password - Cisco/Cisco

Website: HTTP Address : [1]; HTTPS Address : [2]

Group WiFi hotspot: Username/password - user/toto

Progress

Particular task - PART 1: Configuration of the wifi AP; Route through Polytech gateway (172.26.79.254); MAC address filtering on half the eeePC; Tests
Particular task PART 2: Route through local gateway (10.10.10.254); Telnet accessibility
Configuration of the xen VM: Creation & installation of packages; SSH accessibility
Wifi WEP crack
Wifi WPA crack
DNS - Bind configuration: Buying troubadour.lol domain name and the certificate; Bind server, IPv4 and IPv6 configuration
SSL Certificate
DNSSEC
RAID5
Crypted SD card
FreeRadius ID server configuration
WPA2-EAP-secured wifi network
PCBX configuration

Specification of the specific task

Presentation of the particular task

The specific task consist in configuring one of the two wifi access point (AP). Those APs are connected to the Cisco Catalyst 6009 switches to provide further redundancy.

Hardware used for the particular task

We use a Cisco Aironet 2600 wifi access point.

Cisco Aironet 2600 access point

Progress monitoring

Session 1 (01/10/2015)

Steps to follow :

Connecting via serial link to the Cisco Aironet 2600
Adapting the configuration for insecure network
Accessing the hotspot via ethernet
Using the web interface to configure mac address filtering

Session 2 (08/10/2015)

Configuration of the Wifi AP

minicom -os //9600 bauds

en

config

interface BVI 1

ip address 172.26.79.11 255.255.240.0

end

write

Using the web interface to configure mac address filtering (root:Cisco)
Different tests to enable mac filtering
- Unknown problem that lead to the reset of the Access point

Session 3 (15/10/2015)

Reset of the Access point
Mac address filtering working correctly
Creation of the AP (SSID = "troubadour")
Filtering half of the eeePC
Penetration test by MAC spoof from an eeePC :

ifconfig wlan0 hw ether XX:XX:XX:XX:XX:XX

Session 4 (22/10/2015)

Creation of the virtual drives
Configuration of the xen virtual machine "troubadour"

xen-create-image --hostname=troubadour --ip=193.48.57.165 --netmask=255.255.255.240 --gateway=193.48.57.174 --dir=/usr/local/xen 
--mirror=http://debian.polytech-lille.fr/debian/ --dist=jessie --passwd

Session 5 (12/11/2015)

Successful wifi WEP encryption crack
SSH accessibility of the VM.

WEP Encryption crack

Session 6 (19/11/2015)

Wifi WPA encryption crack attempt almost successful
Cap file & handshake captured
dictionnary created with the powerful command crunch:

crunch 8 8 -o wl.txt -t %%%%%%%%

Problems with apt-get to download aircrack on tutur

Session 7 (25/11/2015)

Crack of the WPA key

Aircrack of the previously captured cap file
Successful WPA crack
Configuration of the wifi hotspot for the local network

ip default-gateway 10.10.10.254

Telnet accessibility from a VM
Configuration of the DNS server following this tutorial
Beginning of SSL configuration while Gandi processes the DNS change

DNS analyse by digicert.com

Successful DNS configuration :

Session 8 (26/11/2015)

End of SSL certification following this tutorial
Fixing a conflict in /etc/apache2/ports.conf
- Apache2 would not restart because of an already-listened-to 443 port
- The port 443 was listened by a previous module
- All other modules listenning to 443 port were commented out
Successful SSL configuration for www.troubadour.lol and troubadour.lol

Firefox is happy, the connexion is secured

Fixing a bug on the IPv6 address, causing the DNSSEC to fail
- TCP and UDP transit didn't seem to work
- Port 53 seemed closed (according to zonemaster.com)
- A correct rebuild of Bind worked

Results on the different test of zonemaster.com

Session 9 (03/12/2015)

RAID5 configuration

Configuration of the Radius server
- New client, VLAN and user
- PEAP encryption instead of MD5
RAID5 configuration

WiFi interface connected to our hotspot

Session 10 (04/01/2016)

Correction of errors on the raid5 drives
- The drive mount sequence was wrong (Automatic mount of an non-existent raid drive)
- Removing the mdadm deamon solved the problem
- Only downside : the raid has to be configured on each reboot
- Automatic "md127" appears

mdadm --stop /dev/md127
[   37.984366] md: md127 stopped.
[   37.984382] md: unbind<xvdf>
[   37.984388] md: export_rdev(xvdf)
[   37.984420] md: unbind<xvdd>
[   37.984425] md: export_rdev(xvdd)
mdadm: stopped /dev/md127

This commands are mandatory for a correct detection of our raid on md0
Test with a file on the raid
- Even with one disk less (here xvde) we can mount the raid and see its content

Successful test of the RAID5 drives

@@ Ligne 1 : / Ligne 1 : @@
 == Useful information ==
-=== Particular task ===
 '''Gabriel Pagola Nielsen''' & '''Jérémie Denéchaud'''<br/>
@@ Ligne 7 : / Ligne 6 : @@
 : Address - '''193.48.57.165'''<br/>
 :
-; Wifi hotspot
+; WiFi hotspot - Particular task
-: Name -
+: Name - Troubadour
-: address - '''172.26.79.11'''<br/>
+: Address (first part) - '''172.26.79.11'''<br/>
-: Sub-network address - '''10.10.10.2'''<br/>
+: Address (second part) - '''10.10.10.2'''<br/>
+: Username/password - Cisco/Cisco
+; Website
+: HTTP Address : [http://troubadour.lol/]
+: HTTPS Address : [https://troubadour.lol/]
+; Group WiFi hotspot
+: Username/password - user/toto
-== Specification of the specific task ==
-=== Presentation of the particular task  ===
-The specific task consist in configuring one of the two wifi access point (AP). Those APs are connected to the Cisco Catalyst 6009 switches to provide further redundancy.
-=== Hardware used for the particular task  ===
-We use a Cisco Aironet 2600 wifi access point.
-[[Image:Product image large.jpg|thumb|Cisco Aironet 2600 access point]]
-<br><br>
 === Progress ===
-; <span style="color: green;">Particular task
+; <span style="color: green;">Particular task - PART 1
 : Configuration of the wifi AP
 : Route through Polytech gateway (172.26.79.254)
-: MAC address filtering (half the eeePC)
+: MAC address filtering on half the eeePC
 : Tests
-; <span style="color: green;">Configuration of the xen VM and eeePC</span>
+; <span style="color: green;">Particular task PART 2
+: Route through local gateway (10.10.10.254)
+: Telnet accessibility
+; <span style="color: green;">Configuration of the xen VM</span>
 : Creation & installation of packages
 : SSH accessibility
 ; <span style="color: green;">Wifi WEP crack </span>
 ; <span style="color: green;">Wifi WPA crack </span>
-;<span style="color: green;">Buying troubadour.lol domain name </span>
+;<span style="color: green;">DNS - Bind configuration</span>
-;<span style="color: red;">DNS </span>
+: Buying troubadour.lol domain name and the certificate
-;<span style="color: red;">Certificate authentication </span>
+: Bind server, IPv4 and IPv6 configuration
-;<span style="color: red;">DNSSEC </span>
+;<span style="color: green;">SSL Certificate </span>
+;<span style="color: green;">DNSSEC</span>
+;<span style="color: orange;">RAID5</span>
+;<span style="color: red;">Crypted SD card</span>
+;<span style="color: green;">FreeRadius ID server configuration </span>
+;<span style="color: green;">WPA2-EAP-secured wifi network </span>
+;<span style="color: red;">PCBX configuration </span>
+== Specification of the specific task ==
+=== Presentation of the particular task  ===
+The specific task consist in configuring one of the two wifi access point (AP). Those APs are connected to the Cisco Catalyst 6009 switches to provide further redundancy.
+=== Hardware used for the particular task  ===
+We use a Cisco Aironet 2600 wifi access point.
+[[Image:Product image large.jpg|thumb|Cisco Aironet 2600 access point]]
 == Progress monitoring ==
@@ Ligne 62 : / Ligne 78 : @@
 * Creation of the AP (SSID = "troubadour")
 * Filtering half of the eeePC
+* Penetration test by MAC spoof from an eeePC :
+ ifconfig wlan0 hw ether XX:XX:XX:XX:XX:XX
 === Session 4 (22/10/2015) ===
@@ Ligne 70 : / Ligne 88 : @@
 === Session 5 (12/11/2015) ===
-* Successful wifi WEP encryption crack (screenshots incoming)
+* Successful wifi WEP encryption crack
 * SSH accessibility of the VM.
+[[Fichier:crack_wep_denech.jpg|center|thumb|300px|WEP Encryption crack]]
 === Session 6 (19/11/2015) ===
@@ Ligne 79 : / Ligne 98 : @@
   crunch 8 8 -o wl.txt -t %%%%%%%%
 * Problems with apt-get to download aircrack on tutur
+<br /><br />
 === Session 7 (25/11/2015) ===
+[[Fichier:crack_wpa_denechaud.png|200px|thumb|right|Crack of the WPA key]]
 * Aircrack of the previously captured cap file
 * Successful WPA crack
+* Configuration of the wifi hotspot for the local network
+ ip default-gateway 10.10.10.254
+* Telnet accessibility from a VM
+* Configuration of the DNS server following [https://wiki.gandi.net/fr/hosting/using-linux/tutorials/debian/bind this tutorial]
+* Beginning of SSL configuration while Gandi processes the DNS change
+[[Fichier:dns2_denech.png|100px|thumb|DNS analyse by digicert.com]]
+* Successful DNS configuration :
+<br />
+[[Fichier:dns_denech.png|Bind is correctly feeding the domain name]]
+<br /><br />
+<br /><br />
+=== Session 8 (26/11/2015) ===
+* End of SSL certification following [https://wiki.gandi.net/fr/hosting/using-linux/tutorials/ubuntu/ssl this tutorial]
+* Fixing a conflict in /etc/apache2/ports.conf
+** Apache2 would not restart because of an already-listened-to 443 port
+** The port 443 was listened by a previous module
+** All other modules listenning to 443 port were commented out
+* Successful SSL configuration for www.troubadour.lol and troubadour.lol
+[[Fichier:ssl2_denech.png|thumb|300px|center|Firefox is happy, the connexion is secured]]
+* Fixing a bug on the IPv6 address, causing the DNSSEC to fail
+** TCP and UDP transit didn't seem to work
+** Port 53 seemed closed (according to [https://www.zonemaster.fr/test/9b93b0fe724c9298 zonemaster.com])
+** A correct rebuild of Bind worked
+[[Fichier:dnssec_denech.png|thumb|300px|center|Results on the different test of zonemaster.com]]
+<br/><br/>
+=== Session 9 (03/12/2015) ===
+[[Fichier:raid5_denech.png|thumb|right|RAID5 configuration]]
+* Configuration of the Radius server
+** New client, VLAN and user
+** PEAP encryption instead of MD5
+* RAID5 configuration
+[[Fichier:wifi_denech.png|thumb|left|WiFi interface connected to our hotspot]]
+<br/><br/><br/><br/><br/><br/><br/><br/>
+=== Session 10 (04/01/2016)===
+* Correction of errors on the raid5 drives
+** The drive mount sequence was wrong (Automatic mount of an non-existent raid drive)
+** Removing the mdadm deamon solved the problem
+** Only downside : the raid has to be configured on each reboot
+** Automatic "md127" appears
+ mdadm --stop /dev/md127
+ [   37.984366] md: md127 stopped.
+ [   37.984382] md: unbind<xvdf>
+ [   37.984388] md: export_rdev(xvdf)
+ [   37.984420] md: unbind<xvdd>
+ [   37.984425] md: export_rdev(xvdd)
+ mdadm: stopped /dev/md127
+* This commands are mandatory for a correct detection of our raid on md0
+* Test with a file on the raid
+** Even with one disk less (here xvde) we can mount the raid and see its content
-=== Session 8 (19/11/2015) ===
+[[Fichier:Testraid5_jed.jpg|thumb|600px|center|Successful test of the RAID5 drives]]