G1 : Advanced Networking Protocol Workshop

De Wiki d'activités IMA
Révision datée du 19 novembre 2015 à 10:03 par Avinot (discussion | contributions) (Workshop progress)

The main aim of this workshop is to realize a redundant network infrastructure to ensure maximum availability in case of a device or path failure. The architecture of the network is shown in the diagram given below.

Network architecture.PNG

Scope statement for the specific task

Task overview

We were assigned to configure one of the L3 switches to enable routing protocol(for IPv4 and IPv6) and also to ensure layer 3 redundancy with HSRP.

Materials used for the specific task

  • Layer-3 Switch : Cisco Catalyst 3560-E
  • PC with serial connection

Workshop progress

Week 1 (28/09/2015)

conf files :

Week 2 (05/10/2015)

  • ssh pour la machine cordouan
ssh root@cordouan.insecserv.deule.net
  • configuration de la machine virtuelle XEN
xen-create-image --hostname=WESTMALLE --ip=193.48.57.161 --netmask=255.255.255.240 --gateway=193.48.57.174 \
--nameserver=193.48.57.48 --dir=/usr/local/xen --genpass=0 --password=pasglop --dist=stable
  • permet de la créer une fois le fichier de config
xl create /etc/xen/WESTMALLE.cfg
  • emplacement fichier de configuration de la machine XEN
/etc/XEN/WESTMALLE.cfg

Fichier:WESTMALLEcfg.txt
modification de la taille mémoire, et "bridge=IMA5sc"

  • permet de lancer la machine virtuelle XEN
xl console WESTMALLE

Week 3 (12/10/2015)

This week we started with installing few important packages in the Xen virtual server such as apache2, fail2ban, bind9, dnsutils and openssh-server. To secure the ssh server, we changed the configuration line (as shown below) of the file /etc/ssh/sshd_config:

Port 619
PermitRootLogin no-password

To enable root login, we had to generate an asymmetric key (private and public) where the public key will be stored in the server while the user who wishes to connect to the server must have the private key. To generate the asymmetric key, we used the command:

ssh-keygen -b 2048

Then, the public key had to be stored in a file called authorized_keys2 (for SSHv2).

After that, we continued to configure the DNS server. First of all, we bought a domain name from one of the domain name registrars, Gandi. Since we wanted to host our own DNS server, we pointed the primary DNS field to our computer (ns1.troisiemesexe.lol). The secondary DNS field was filled with Gandi’s secondary NS server. It was time we configured our own DNS server.

/etc/hosts:

127.0.0.1       localhost
193.48.57.161   westmalle.troisiemesexe.lol  westmalle
193.48.57.161   ns1.troisiemesexe.lol        ns1

/etc/host.conf:

order hosts, bind
multi on

/etc/networks:

default                 0.0.0.0
loopback                127.0.0.0
link-local              169.254.0.0
lnet.troisiemesexe.lol  193.48.57.160

/etc/resolv.conf:

domain troisiemesexe.lol
search troisiemesexe.lol
nameserver 127.0.0.1
nameserver 193.48.57.48

/etc/bind/db.troisiemesexe.lol:

$TTL            604800
@       IN      SOA     ns1.troisiemesexe.lol. admin.troisiemesexe.lol. (
                         2015101705     ; Serial
                         900            ; Refresh
                         28800          ; Retry
                         604800         ; Expire
                         86400 )        ; Minimum

@               IN      A       193.48.57.161
;@              IN      AAAA    ::1

@               IN      NS      ns1.troisiemesexe.lol.
@               IN      NS      ns6.gandi.net.

ns1             IN      A       193.48.57.161
;ns1            IN      AAAA    :::1

westmalle       IN      A       193.48.57.161
arch            IN      A       193.48.57.174   ;arch -> router
www             IN      A       193.48.57.161

/etc/bind/named.conf.local:

zone "troisiemesexe.lol" IN {
        type master;
        file "/etc/bind/db.troisiemesexe.lol";
        allow-transfer {217.70.177.40;};
        allow-query {any;};
        notify yes;
};

And then, we configured the apache VirtualHosts. If the server receives an HTTP request on port 80, it will rewrite the URL to HTTPS on port 443.

/etc/apache2/sites-available/troisiemesexe.lol.conf:

<VirtualHost *:80>
        ServerName   troisiemesexe.lol
        ServerAlias  www.troisiemesexe.lol      *.troisiemesexe.lol
        ServerAdmin  root@troisiemesexe.lol
        DocumentRoot /var/www/troisiemesexe.lol

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log  combined

        RewriteEngine on
        ReWriteCond  %{HTTP_HOST}   !^(westmalle|ns1) [NC]
        ReWriteCond  %{SERVER_PORT} !^443$
        RewriteRule  ^/(.*)         https://%{HTTP_HOST}/$1 [NC,R=301,L]

        RewriteRule  ^(.*)$         https://www.troisiemesexe.lol$1 [R=301,L]
</VirtualHost>

<IfModule mod_ssl.c>
        <VirtualHost *:443>
                ServerName   troisiemesexe.lol
                ServerAlias  www.troisiemesexe.lol
                ServerAdmin  root@troisiemesexe.lol
                DocumentRoot /var/www/troisiemesexe.lol

                ErrorLog ${APACHE_LOG_DIR}/error.log
                CustomLog ${APACHE_LOG_DIR}/access.log combined

                SSLEngine               on
                SSLCertificateFile      /etc/ssl/certs/troisiemesexe.lol.crt
                SSLCertificateKeyFile   /etc/ssl/private/troisiemesexe.lol.key
                SSLCertificateChainFile /etc/ssl/certs/GandiStdSSLCA2.pem
                SSLVerifyClient         None
        </VirtualHost>
</IfModule>

To enable the site, we used the command:

a2ensite troisiemesexe.lol

Semaine 4 (22/10/2015)

semaine 5 (12/11/2015)

Cassage de la clef WEP

  • On commence par donner la main à l'application airmon-ng sur l'interface wlan0
airmon-ng start wlan0
  • On termine tous les processus qui utilisait precedement à airmon-ng l'interface wlan0
airmon-ng check kill
  • On commence par visualiser les réseaux visibles par wlan0
airodump-ng wlan0mon
  • notre cible est cracotte01. On va sauvegarder dans fromage.cap tous les paquets à destination de 00:23:5E:1E:05:40
airodump-ng --essid cracotte01 --write fromage -c 7 --bssid 00:23:5E:1E:05:40 wlan0mon
  • Pendant que les paquets s'enregistrent dans fromage.cap, on ouvre un nouveau terminal et on lance une commande qui va tenter de décoder les paquets avec la commande aircrack-ng. On stockera la clef dans le fichier KEY
aircrack-ng -l KEY -s -f 15 fromage-01.cap